Questions? Call Us!

1-800-486-5542

Sleeves, Stops and Terminals

Shop Rigging Hardware

Oval Sleeves

Oval Sleeves
Available in aluminum, copper, zinc plated copper or nickel plated copper.

Cable Size Nicropress Oval Sleeve Nicopress Hand Tool Mfg. # Approx. Weight Per 1000 Sleeves (lbs.) Approx. Sleeve Length Before Compressed Approx. Sleeve Length After Compressed
Plain Copper Zinc-Plated Copper
Mfg. # CSI Ref. # Mfg. # CSI Ref. #
1/32″ 17-1-B CS-07-1718 27-1-B CS-07-1728 *17-BA 0.6 1/4″ 5/16″
3/64” 18-11-B4 CS-07-1719 28-11-B4 CS-07-1729 51-B4-887 2 3/8″ 7/16″
1/16″ 18-1-C CS-07-1720 28-1-C CS-07-1730 51-C-887 2 3/8″ 7/16″
3/32″ 18-2-G CS-07-1721 28-2-G CS-07-1731 51-G-887 5 3/8″ 7/16″
1/8″ 18-3-M CS-07-1722 18-3-M CS-07-1732 51-M-850 17 9/16″ 3/4″
5/32″ 18-4-P CS-07-1723 18-4-P CS-07-1733 51-P-850 23 5/8″ 7/8″
3/16″ 18-6-X CS-07-1724 18-6-X CS-07-1734 51-X-850 49 15/16″ 1-3/16″
7/32″ 18-8-F2 CS-07-1725 18-8-F2 CS-07-1735 51-F2-850 56 7/8″ 1-1/16″
1/4″ 18-10-F6 CS-07-1726 18-10-F6 CS-07-1736 3-F6-950 80 1-1/8″ 1-1/2″
5/16″ 18-13-G9 CS-07-1727 28-13-G9 CS-07-1737 3-G9-950 114 1-1/16″ 1-3/8″

* Formerly 17:1 Tool

 

Stop Sleeves
Available in aluminum or copper.

Cable Size Nicopress Stop Sleeve Nicopress Hand Tool Mfg. # Outside Diameter of Sleeve Approx. Weight Per 1000 Sleeves (lbs.) Approx. Sleeve Length Before Compressed **Typical Holding Strength of Stop Sleeve (lbs.)
Mfg. # CSI Ref. #
1/32″ 871-32-B CS-07-1738 *17-BA 1/8″ 0.75 1/4″ 120
3/64″ 871-12-B4 CS-07-1739 51-B4-887 11/64″ 1.5 7/32″ 240
1/16″ 871-1-C CS-07-1740 51-C-887 13/64″ 2 7/32″ 430
1/16″ ***871-1-Q CS-07-1741 51Q-929 1/4″ 2 5/32″ 425
3/32″ 871-17-J (Yellow) CS-07-1742 51-MJ 21/64″ 8 5/16″ 600
3/32″ ***871-3-Q CS-07-1743 51-Q-929 1/4″ 2 5/32″ 550
1/8″ 871-18-J (Red) CS-07-1744 51-MJ 21/64″ 8 5/16″ 900
5/32″ 871-19-M CS-07-1745 51-MJ 27/64″ 13 5/16″ 1,200
3/16″ 871-20-M (Black) CS-07-1746 51-MJ 27/64″ 12 5/16″ 1,600
7/32″ 871-22-M CS-07-1747 51-MJ 7/16″ 20 5/8″ 2,500
1/4″ 871-23-F6 CS-07-1748 3-F6-950 21/32″ 60 11/16″ 3,500
5/16″ 871-26-F6 CS-07-1749 3-F6-950 21/32″ 60 11/16″ 4,000

* Formerly 17:1 Tool

** Holding strengths shown are based on use of galvanized aircraft cable.

***Electro Galvanized Steel Sleeves.

 

Wire Rope Terminals

Wire Rope Terminal - Stud MS 21259 Wire Rope Terminal - Eye End MS 20668 Wire Rope Terminal - Fork End MS 20667 Wire Rope Terminal - Single Shank Ball MS20664

The Most Trusted and Respected Company in Rigging and Overhead Lifting.

Connect with us