Questions? Call Us!

1-800-486-5542

Crosby® Screw Pin Anchor Shackles

Shop Rigging Hardware

Crosby

Screw pin anchor shackles meet the performance requirements of Federal Specification RR-C-271D Type IVA, Grade A, Class 2, except for those provisions required of the contractor.

Crosby G-209 and S-209 Screw Pin Anchor Shackles

  • Capacities 1/3 thru 55 metric tons.
  • Forged – Quenched and Tempered, with alloy pins.
  • Working Load Limit permanently shown on every shackle.
  • Hot Dip Galvanized or Self Colored.
  • Fatigue rated.
  • Shackles 25t and larger are RFID equipped.
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification available when requested at the time of order.
  • Shackles are Quenched and Tempered and can meet DNV impact requirements of 42 joules at -20°C.
  • A Crosby RFID-Equipped productCrosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
  • Look for the Red Pin®…the mark of genuine Crosby quality.
  • Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
Nom.
Size
(in.)
G-209 S-209 Weight
Each
(lbs.)
Working
Load
Limit*
(t)
Mfg. # CSI Ref. # Mfg. # CSI Ref. #
3/16 1018357 CS-07-1086 n/a n/a 0.06 1/3
1/4 1018375 CS-07-1087 1018384 CS-07-1103 0.1 1/2
5/16 1018393 CS-07-1088 1018400 CS-07-1104 0.19 3/4
3/8 1018419 CS-07-1089 1018428 CS-07-1105 0.31 1
7/16 1018437 CS-07-1090 1018446 CS-07-1106 0.38 1-1/2
1/2 1018455 CS-07-1091 1018464 CS-07-1107 0.72 2
5/8 1018473 CS-07-1092 1018482 CS-07-1108 1.37 3-1/4
3/4 1018491 CS-07-1093 1018507 CS-07-1109 2.35 4-3/4
7/8 1018516 CS-07-1094 1018525 CS-07-1110 3.62 6-1/2
1 1018534 CS-07-1095 1018543 CS-07-1111 5.03 8-1/2
1-1/8 1018552 CS-07-1096 1018561 CS-07-1112 7.41 9-1/2
1-1/4 1018570 CS-07-1097 1018589 CS-07-1113 9.5 12
1-3/8 1018598 CS-07-1098 1018605 CS-07-1114 13.53 13-1/2
1-1/2 1018614 CS-07-1099 1018623 CS-07-1115 17.2 17
1-3/4 1018632 CS-07-1100 1018641 CS-07-1116 27.78 25
2 1018650 CS-07-1101 1018669 CS-07-1117 45 35
2-1/2 1018678 CS-07-1102 1018687 CS-07-1118 85.75 55

* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.

Crosby G-209 and S-209 Screw Pin Anchor Shackles

Nominal
Size (in.)
Dimensions (in.) Tolerance + / –
A B C D E F G H L M P C A
3/16 0.38 0.25 0.88 0.19 0.6 0.56 0.98 1.47 0.16 1.14 0.19 0.06 0.06
1/4 0.47 0.31 1.13 0.25 0.78 0.61 1.28 1.84 0.19 1.43 0.25 0.06 0.06
5/16 0.53 0.38 1.22 0.31 0.84 0.75 1.47 2.09 0.22 1.71 0.31 0.06 0.06
3/8 0.66 0.44 1.44 0.38 1.03 0.91 1.78 2.49 0.25 2.02 0.38 0.13 0.06
7/16 0.75 0.5 1.69 0.44 1.16 1.06 2.03 2.91 0.31 2.37 0.44 0.13 0.06
1/2 0.81 0.63 1.88 0.5 1.31 1.19 2.31 3.28 0.38 2.69 0.5 0.13 0.06
5/8 1.06 0.75 2.38 0.63 1.69 1.5 2.94 4.19 0.44 3.34 0.69 0.13 0.06
3/4 1.25 0.88 2.81 0.75 2 1.81 3.5 4.97 0.5 3.97 0.81 0.25 0.06
7/8 1.44 1 3.31 0.88 2.28 2.09 4.03 5.83 0.5 4.5 0.97 0.25 0.06
1 1.69 1.13 3.75 1 2.69 2.38 4.69 6.56 0.56 5.13 1.06 0.25 0.06
1-1/8 1.81 1.25 4.25 1.16 2.91 2.69 5.16 7.47 0.63 5.71 1.25 0.25 0.06
1-1/4 2.03 1.38 4.69 1.29 3.25 3 5.75 8.25 0.69 6.25 1.38 0.25 0.06
1-3/8 2.25 1.5 5.25 1.42 3.63 3.31 6.38 9.16 0.75 6.83 1.5 0.25 0.13
1-1/2 2.38 1.63 5.75 1.54 3.88 3.63 6.88 10 0.81 7.33 1.62 0.25 0.13
1-3/4 2.88 2 7 1.84 5 4.19 8.86 12.34 1 9.06 2.25 0.25 0.13
2 3.25 2.25 7.75 2.08 5.75 4.81 9.97 13.68 1.22 10.35 2.4 0.25 0.13
2-1/2 4.13 2.75 10.50 2.71 7.25 5.69 12.87 17.84 1.38 13 3.13 0.25 0.25

The Most Trusted and Respected Company in Rigging and Overhead Lifting.

Connect with us