Crosby® Bolt Type Anchor Shackles
![]() |
|
![]() |
|
![]() |
|
![]() |
|
![]() |
![]() |
![]() |
- Capacities 1/3 thru 150 metric tons, grade 6.
- Working Load Limit and grade “6” permanently shown on every shackle.
- Forged – Quenched and Tempered, with alloy pins.
- Hot Dip galvanized or Self Colored. (85, 120, and 150 metric ton shackles are all hot dip galvanized bows and the bolts are Dimetcoted® and painted red)
- Fatigue rated (1/3t – 55t).
- Shackles 25t and larger are RFID EQUIPPED.
- Approved for use at -40°C (-40°F) to 204°C (400°F).
- Meets or exceeds all requirements of ASME B30.26.
Shackles 85 metric tons and larger are individually proof tested to 2.0 times the working load limit.
- Shackles 120 metric tons and larger are proof tested, Magnetic Particle Inspected and provided with Serialized Pin and Bow.
- Type Approval and certification in accordance with ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide for Certification of Cranes.
- 3.1 Certification as standard available for charpy and statistical proof test for pg 73 only up to 25 tons to DNV2.7-1 and EN13889.
- Crosby 2t through 25t G2130 anchor shackles are type approved to DNV Certification Notes 2.7-1- Offshore Containers. These Crosby shackles are statistical proof and impact tested to 42 joules (31 ft-Lbs.) min. ave. at -20°C (-4°F). The tests are conducted by Crosby and 3.1 test certification is available upon request.
- All other 2130 and all 2150 shackles can meet charpy requirements of 42 joules (31 ft-Lbs) avg at -20°C (-4°F) upon special request.
- Look for the Red Pin®…the mark of genuine Crosby quality.
- Meets the performancerequirements of Federal Specification RR-C-271F Type IVA, Grade A, Class 3, except for those provisions required of the contractor.
Nom. Size (in.) |
G-2130 | S-2130 | Weight Each (lbs.) |
Working Load Limit* (t) |
||
---|---|---|---|---|---|---|
Mfg. # | CSI Ref. # | Mfg. # | CSI Ref. # | |||
3/16 | 1019464 | CS-07-1119 | n/a | n/a | 0.06 | 1/3‡ |
1/4 | 1019466 | CS-07-1120 | n/a | n/a | 0.11 | 1/2 |
5/16 | 1019468 | CS-07-1121 | n/a | n/a | 0.22 | 3/4 |
3/8 | 1019470 | CS-07-1122 | n/a | n/a | 0.33 | 1 |
7/16 | 1019471 | CS-07-1123 | n/a | n/a | 0.49 | 1-1/2 |
1/2 | 1019472 | CS-07-1124 | 1019481 | CS-07-1139 | 0.79 | 2 |
5/8 | 1019490 | CS-07-1125 | 1019506 | CS-07-1140 | 1.68 | 3-1/4 |
3/4 | 1019515 | CS-07-1126 | 1019524 | CS-07-1141 | 2.72 | 4-3/4 |
7/8 | 1019533 | CS-07-1127 | 1019542 | CS-07-1142 | 3.95 | 6-1/2 |
1 | 1019551 | CS-07-1128 | 1019560 | CS-07-1143 | 5.66 | 8-1/2 |
1-1/8 | 1019579 | CS-07-1129 | 1019588 | CS-07-1144 | 8.27 | 9-1/2 |
1-1/4 | 1019597 | CS-07-1130 | 1019604 | CS-07-1145 | 11.71 | 12 |
1-3/8 | 1019613 | CS-07-1131 | 1019622 | CS-07-1146 | 15.83 | 13-1/2 |
1-1/2 | 1019631 | CS-07-1132 | 1019640 | CS-07-1147 | 20.8 | 17 |
1-3/4 | 1019659 | CS-07-1133 | 1019668 | CS-07-1148 | 33.91 | 25 |
2 | 1019677 | CS-07-1134 | 1019686 | CS-07-1149 | 52.25 | 35 |
2-1/2 | 1019695 | CS-07-1135 | 1019702 | CS-07-1150 | 98.25 | 55 |
3 | 1019711 | CS-07-1136 | n/a | n/a | 154 | †85 |
3-1/2 | 1019739 | CS-07-1137 | n/a | n/a | 265 | †120‡ |
4 | 1019757 | CS-07-1138 | n/a | n/a | 338 | †150‡ |
* NOTE: Maximum Proof Load is 2 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
† Individually Proof Tested with certification.
‡ Furnished in Anchor style only and furnished with Round Head Bolts with welded handles.

Nom. Size (in.) |
Dimensions (in.) |
Tolerance + / – |
|||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
A | B | C | D | E | F | H | L | N | C | A | |
3/16 | 0.38 | 0.25 | 0.88 | 0.19 | 0.6 | 0.56 | 1.47 | 0.98 | 0.19 | 0.06 | 0.06 |
1/4 | 0.47 | 0.31 | 1.13 | 0.25 | 0.78 | 0.61 | 1.84 | 1.28 | 0.25 | 0.06 | 0.06 |
5/16 | 0.53 | 0.38 | 1.22 | 0.31 | 0.84 | 0.75 | 2.09 | 1.47 | 0.31 | 0.06 | 0.06 |
3/8 | 0.66 | 0.44 | 1.44 | 0.38 | 1.03 | 0.91 | 2.49 | 1.78 | 0.38 | 0.13 | 0.06 |
7/16 | 0.75 | 0.5 | 1.69 | 0.44 | 1.16 | 1.06 | 2.91 | 2.03 | 0.44 | 0.13 | 0.06 |
1/2 | 0.81 | 0.64 | 1.88 | 0.5 | 1.31 | 1.19 | 3.28 | 2.31 | 0.5 | 0.13 | 0.06 |
5/8 | 1.06 | 0.77 | 2.38 | 0.63 | 1.69 | 1.5 | 4.19 | 2.94 | 0.69 | 0.13 | 0.06 |
3/4 | 1.25 | 0.89 | 2.81 | 0.75 | 2 | 1.81 | 4.97 | 3.5 | 0.81 | 0.25 | 0.06 |
7/8 | 1.44 | 1.02 | 3.31 | 0.88 | 2.28 | 2.09 | 5.83 | 4.03 | 0.97 | 0.25 | 0.06 |
1 | 1.69 | 1.15 | 3.75 | 1 | 2.69 | 2.38 | 6.56 | 4.69 | 1.06 | 0.25 | 0.06 |
1-1/8 | 1.81 | 1.25 | 4.25 | 1.13 | 2.91 | 2.69 | 7.47 | 5.16 | 1.25 | 0.25 | 0.06 |
1-1/4 | 2.03 | 1.4 | 4.69 | 1.29 | 3.25 | 3 | 8.25 | 5.75 | 1.38 | 0.25 | 0.06 |
1-3/8 | 2.25 | 1.53 | 5.25 | 1.42 | 3.63 | 3.31 | 9.16 | 6.38 | 1.5 | 0.25 | 0.13 |
1-1/2 | 2.38 | 1.66 | 5.75 | 1.53 | 3.88 | 3.63 | 10 | 6.88 | 1.62 | 0.25 | 0.13 |
1-3/4 | 2.88 | 2.04 | 7 | 1.84 | 5 | 4.19 | 12.34 | 8.8 | 2.25 | 0.25 | 0.13 |
2 | 3.25 | 2.3 | 7.75 | 2.08 | 5.75 | 4.81 | 13.68 | 10.15 | 2.4 | 0.25 | 0.13 |
2-1/2 | 4.13 | 2.8 | 10.5 | 2.71 | 7.25 | 5.69 | 17.9 | 12.75 | 3.13 | 0.25 | 0.25 |
3 | 5 | 3.3 | 13 | 3.12 | 7.88 | 6.5 | 21.5 | 14.62 | 3.62 | 0.25 | 0.25 |
3-1/2 | 5.25 | 3.76 | 14.63 | 3.62 | 9 | 8 | 24.88 | 17.02 | 4.38 | 0.25 | 0.25 |
4 | 5.5 | 4.26 | 14.5 | 4 | 10 | 9 | 25.68 | 18 | 4.56 | 0.25 | 0.25 |