Klein® Cutters
High-Leverage Side Cutters for Rebar Work
High-leverage design for easier cutting of soft annealed tie wire. Provides a 46% greater mechanical cutting and gripping advantage than other pliers of this type. Knurled jaws. Hook bend in one handle for non-slip grip. With coil spring. Plastic-dipped handles.
Mfg. # | CSI Ref. # | A | B | C | D | E | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
in. | mm | in. | mm | in. | mm | in. | mm | in. | mm | ||
D213-9ST | CS-11-2100 | 9-9/32 | 236 | 1-7/16 | 37 | 1-7/32 | 31 | 5/8 | 16 | 23/32 | 18 |
213-9ST | CS-11-2101 | Same as above but with plain handles |
Standard Side Cutters for Rebar Work
Specially designed and sharpened for cutting soft annealed tie wire used on reinforcing rods. Special, heavy, knurled jaws. Hook bend in one handle for non-slip grip. Coil spring holds jaws open. Plastic-dipped handles.
Mfg. # | CSI Ref. # | A | B | C | D | E | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
in. | mm | in. | mm | in. | mm | in. | mm | in. | mm | ||
D201-7CST | CS-11-2102 | 8-3/4 | 222 | 1-9/32 | 33 | 1-5/32 | 29 | 1/2 | 13 | 5/8 | 16 |
201-7CST | CS-11-2103 | Same as above but with plain handles | |||||||||
D2000-7CST | CS-11-2104 | Klein 2000 Series – same as D201-7CST except with ultra-durable “2000 Series” cutting knives for ACSR, bolts, nails and most hardened wire. Plastic-dipped handles. |
High-Leverage, Diagonal Cutters with Angled Head
High-leverage, heavy-duty with head angled for easier work in confined areas. Standard-bevel cutting knives. Plastic-dipped handles.
Mfg. # | CSI Ref. # | A | B | C | D | ||||
---|---|---|---|---|---|---|---|---|---|
in. | mm | in. | mm | in. | mm | in. | mm | ||
D248-8 | CS-11-2105 | 8 | 203 | 13/16 | 21 | 1-3/16 | 30 | 7/16 | 11 |
D238-8 | CS-11-2106 | Same as D248-8, but with semi-flush cutting knives for Cherry Burrell rivets. Not for hard wire. For use on non-ferrous wire only. | |||||||
D2000-48 | CS-11-2107 | Klein 2000 Series – same as D248-8 except with ultra-durable “2000 Series” cutting knives for ACSR, bolts, nails and most hardened wire. Plastic-dipped handles. |
High-Leverage NE-Type Side Cutters
Our most popular side cutting pliers. Smooth, streamlined nose with knurled jaws. High-leverage design provides 46% greater cutting and gripping power than regular 8-1/2″ and 9-1/4″ side cutters. Blue plastic-dipped handles.
Mfg. # | CSI Ref. # | A | B | C | D | E | |||||
---|---|---|---|---|---|---|---|---|---|---|---|
in. | mm | in. | mm | in. | mm | in. | mm | in. | mm | ||
D213-8NE | CS-11-2108 | 8-1/2 | 216 | 1-7/16 | 37 | 1-7/32 | 31 | 5/8 | 16 | 23/32 | 18 |
HD213-8NE | CS-11-2109 | Same as above but with heavy-duty plastic-dipped handles. | |||||||||
D213-9NE | CS-11-2110 | 9-1/4 | 235 | 1-19/32 | 41 | 1-5/16 | 33 | 5/8 | 16 | 25/32 | 20 |
213-9NE | CS-11-2111 | Same as above but with plain handles. | |||||||||
HD213-9NE | CS-11-2112 | Same as above but with heavy-duty plastic-dipped handles. | |||||||||
D2000-9NE | CS-11-2113 | Klein 2000 Series – same as D213-9NE except with ultra-durable “2000 Series” cutting knives for ACSR, bolts, nails and most hardened wire. Blue plastic-dipped handles. | |||||||||
HD2000-9NE | CS-11-2114 | Klein 2000 Series – same as above but with heavy-duty plastic-dipped handles. |
WARNING: Always wear eye protection. NOT insulated. Plastic-dipped or slip-on plastic handles are NOT intended for protection against electrical shock.