Kinshofer Pallet & Block Forks
KM 420 Pallet Fork
Self shifting & adjustable throat & manually adjustable tines
The newest in our pallet fork line, the KM 420 incorporates the spring loaded center of gravity style top arm with the versatility of various lower sections to accommodate your needs. Handling loads up to 6000 lbs, the pallet fork is for use with loader cranes.
For handling palletized and unpalletized loads of building material or stacked loads of concrete blocks.- Efficient handling of different loads saves time and money due to self shifting slide in the top arm.
- Travel can be preset depending on center of gravity of load to be picked up.
- Compression springs return slide to its original position after load is removed.
- Throat height is easily adjusted from 48” to 90” by lock pin.
- Tine spread can also be adapted up to 40” by lock pins.
- Easy tine adjustment allows optimum load distribution.
Specifications
|
Mfg. # |
CSI Ref. # |
Load Cap. (lbs.) |
Throat Height (in.) |
Tine Length (in.) |
Tine Spread max (in.) |
Tine Dims. (width x height) (in.) |
# of tines |
Center of Gravity (in.) |
Self Weight (lbs.) |
|---|---|---|---|---|---|---|---|---|---|
|
KM 420-4840-6000 – style A |
CS-08-1936 |
6,000 |
48-68 |
46 |
40 |
4 x 1.5 |
2 |
24 |
445 |
|
KM 420-6040-6000 – style A |
CS-08-1937 |
6,000 |
60-90 |
46 |
40 |
4 x 1.5 |
2 |
24 |
480 |
|
KM 420-4840-6000 – style B |
CS-08-1938 |
6,000 |
48-68 |
47 |
40 |
2 x 1.5 |
6 |
24 |
540 |
|
KM 420-6040-6000 – style B |
CS-08-1939 |
6,000 |
60-90 |
47 |
40 |
2 x 1.5 |
6 |
24 |
570 |
|
KM 420-4840-6000 – style C |
CS-08-1940 |
6,000 |
48-68 |
46 |
40 |
4 x 1.5 |
2 |
24 |
470 |
|
KM 420-6040-6000 – style C |
CS-08-1941 |
6,000 |
60-90 |
46 |
40 |
4 x 1.5 |
2 |
24 |
505 |
|
KM 420-4840-4500 – style D |
CS-08-1942 |
4,500 |
48-68 |
46 |
40 |
4 x 1.25 |
2 |
24 |
420 |
|
KM 420-6040-4500 – style D |
CS-08-1943 |
4,500 |
60-90 |
46 |
40 |
4 x 1.25 |
2 |
24 |
460 |
Please note:
- Additional tine spreads, throats, load capacities on request.
- Different styles of tines.
- For safer handling of loads in higher elevation a protection trellis or protection chain should be used.
Definition of Styles of Tines
|
Style |
Description |
Number of tines |
Width (in.) |
Height (in.) |
Length (in.) |
Load Capacity (lbs.) |
|---|---|---|---|---|---|---|
|
A – Standard |
– |
2 |
4 |
1.5 |
46 |
6,000 |
|
B – Block |
6 tines instead of 2 tines |
6 |
2 |
1.5 |
47 |
6,000 |
|
C – Offset |
bracket is welded to the tine back in an offset of 6 into the lower end of the tine |
2 |
4 |
1.5 |
46 |
6,000 |
|
D – Roofers |
thinner tines with lower load capacity |
2 |
4 |
1.25 |
46 |
4,500 |
Accessories
|
Type |
Description |
|---|---|
|
KM 460 |
protection trellis for loads up to 4,400 lbs. (43 in x 43 in, height 59 in) |
|
KM 460 |
protection trellis for loads up to 4,400 lbs. (51 in x 51 in, height 59 in) |
|
KM 460 01 |
protection chain for loads up to 4,400 lbs, for securing loads like shrink wrappped stone stacks to be lifted high above ground backstop for supporting unbalanced loads |
|
KM 04 S |
shaft rotator for controlling the rotation and placement of load |
|
KM 460 03 |
rigid suspension link with pin – for rotators up to 9,900 lbs. capacity |
|
KM 460 04 |
non rotating hook – for rotators up to 9,900 lbs. capacity |
|
KM 04 F |
flange rotator for controlling the rotation and placement of the load flange adapter for KM 04 F |