Crosby® Horizontal Clamps
For Horizontal Lifting and Transfer
- Available in capacities of .75 thru 25 metric tons.
- Wide variety of jaw openings available: 0” to 4”.
- Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
- Individually Proof Tested to 2 times the Working Load Limit with certification.
- Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body.
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook.- Maintenance replacement parts are available.
- Manufactured by an ISO 9001 facility.
- All sizes are RFID equipped.
PHTONZ: Jaw opening range 0 to 2-3/8″
* Ultimate load is 5 times the Working Load Limit. IPHSZ : Jaw opening range 0 to 4”
* Ultimate load is 5 times the Working Load Limit. IPHOZ: Jaw opening range 0 to 2-3/8”
* Ultimate load is 5 times the Working Load Limit. |
The IPHTONZ / IPHSZ horizontal lifting clamps are for use in the lifting and transfer of non-sagging material or of bundles of non-sagging material (in horizontal position). These clamps must be used in pairs or more.
The IPHOZ horizontal lifting clamp is to be used for lifting and transferring, in the horizontal position, of thin sheet and other materials that will sag or bend when lifted. These clamps must be used in pairs or more.
|
Model |
Dimensions (in.) |
||||||||
|---|---|---|---|---|---|---|---|---|---|
|
Jaw A |
B |
C |
E |
F |
G |
H |
J |
K |
|
|
IPHTONZ |
0 – 1.18 |
2.95 |
0.63 |
0.63 |
2.52 |
4.64 |
3.19 |
0.47 |
1.81 |
|
IPHTONZ |
0 – 2.38 |
4.8 |
0.63 |
0.86 |
3.86 |
6.03 |
4.33 |
0.63 |
2.05 |
|
IPHTONZ |
0 – 2.38 |
4.61 |
0.78 |
1.03 |
3.86 |
6.42 |
4.72 |
0.78 |
2.72 |
|
IPHTONZ |
0 – 2.38 |
5.2 |
0.98 |
1.19 |
3.89 |
7.2 |
5.13 |
0.78 |
2.72 |
|
IPHTONZ |
0 – 2.38 |
5.2 |
1 |
1.42 |
4.25 |
8.39 |
5.13 |
0.78 |
2.72 |
|
IPHTONZ |
0 – 2.38 |
6.19 |
1.19 |
1.69 |
4.64 |
8.78 |
5.52 |
1 |
3.41 |
|
IPHTONZ |
0 – 2.38 |
6.77 |
1.19 |
1.84 |
5.28 |
10 |
5.91 |
1 |
3.47 |
|
IPHTONZ |
0 – 2.38 |
7.81 |
1.19 |
1.84 |
5.67 |
11.19 |
7.88 |
1 |
3.47 |
|
IPHTONZ |
0 – 2.38 |
6.66 |
1.58 |
1.84 |
6.69 |
11.81 |
8.66 |
1.27 |
4.45 |
|
Model |
Dimensions (in.) |
||||||||
|---|---|---|---|---|---|---|---|---|---|
|
Jaw A |
B |
C |
E |
F |
G |
H |
J |
K |
|
|
IPHSZ |
0 – 4 |
7.56 |
0.78 |
1.03 |
6.3 |
8.73 |
5.52 |
0.78 |
2.56 |
|
IPHSZ |
0 – 4 |
7.88 |
1 |
1.27 |
6.3 |
9.8 |
7.09 |
0.78 |
2.72 |
|
IPHSZ |
0 – 4 |
8.66 |
1.19 |
1.38 |
6.69 |
10.63 |
7.48 |
1 |
2.34 |
|
IPHSZ |
0 – 4 |
8.66 |
1.38 |
1.84 |
6.69 |
10.63 |
7.88 |
1 |
2.73 |
|
Model |
Dimensions (in.) |
||||||||
|---|---|---|---|---|---|---|---|---|---|
|
Jaw A |
B |
C |
E |
F |
G |
H |
J |
K |
|
|
IPHOZ |
0 – 1.18 |
3.53 |
0.63 |
0.63 |
2.75 |
4.64 |
3.19 |
0.47 |
0.47 |
|
IPHOZ |
0 – 1.75 |
5.23 |
0.63 |
0.86 |
4.92 |
7.56 |
3.94 |
0.63 |
0.47 |
|
IPHOZ |
0 – 1.75 |
5.39 |
0.78 |
1.03 |
4.92 |
7.88 |
4.72 |
0.78 |
0.39 |
|
IPHOZ |
0 – 1.75 |
5.44 |
0.98 |
1.19 |
4.95 |
8.66 |
4.72 |
0.78 |
0.39 |
|
IPHOZ |
0 – 2.38 |
6.73 |
1.19 |
1.42 |
5.31 |
9.25 |
5.13 |
0.78 |
0.78 |
|
IPHOZ |
0 – 2.38 |
8.31 |
1.19 |
1.69 |
6.53 |
10.86 |
6.3 |
1 |
0.78 |
|
IPHOZ |
0 – 2.38 |
8.55 |
1.58 |
1.84 |
6.61 |
11.58 |
7.48 |
1 |
0.75 |
|
IPHOZ |
0 – 2.38 |
8.66 |
1.58 |
1.84 |
7.2 |
12.48 |
9.84 |
1 |
0.86 |