Questions? Call Us!

1-800-486-5542

Crosby® Clamp-Co Beam Clamps

Shop Hoist & Lifting

Crosby Clamp-Co Beam ClampsCrosbyCrosby Clamp-Co Beam Clamps provide an efficient method for handling wide flange beam sections and plate girders. When lifting, these beam clamps grip the beam at three points, and when properly balanced and safely guided, the beam can be handled even if the clamp is slightly off center lengthwise.

This Crosby Product is RFID Equipped.

  • Capacities: 5 Tons to 35 Tons.
  • Eliminates the need for slings, chokers, and spreader bars.
  • When applied to load, the tongs automatically open and slide under the flange of the beam.
  • Center plate and gripping tongs work together – the heavier the beam, the greater the clamping pressure.
  • Model “NS” clamps have a recessed base to accept studs welded to the beam surface.
  • Individually Proof Tested to 2 times the Working Load Limit with certification.
  • Finish – Red Paint
  • All sizes are RFID equipped.

NOTE: Control the beam at all times. Beams should be gripped as near the center as possible. Snubbing lines at each end must be used to control excessive twisting or swinging, and to guide the beam to its proper place. Each lifting situation may have a specific demand which should be addressed before lifting.

Crosby Clamp-Co Beam Clamps Crosby Clamp-Co Beam Clamps Crosby Clamp-Co Beam Clamps
Model

No.

BCFG

Mfg. #

CSI Ref. # Flange Grip Range (in.) Weight

Each

(lbs.)

Working

Load Limit

(tons)*

Width Thickness
F-5 2732000 CS-08-1904 4 – 10 0.5 – 1 70 5
F-15 2732009 CS-08-1905 7 – 17 0.5 – 2 153 15
NS-15 2732018 CS-08-1906 7 – 17 0.5 – 2 153 15
F-25 2732027 CS-08-1907 16 – 24 1 – 3 290 25
NS-25 2732036 CS-08-1908 16 – 24 1 – 3 290 25
F-35 2732045 CS-08-1909 16 – 36 1.63 – 4 519 35
NS-35 2732054 CS-08-1910 16 – 36 1.63 – 4 519 35

* Maximum Proof Load is 2 times the Working Load Limit.

Model

No.

Dimensions (in.)
A B C D E F G H J
F-5 9.5 26 12 20 25.5 16 0.75 4 1
F-15 15.5 34 17 27 34.5 25 7 17 2
NS-15 15.5 34 17 27 34.5 25 7 17 2
F-25 23 48 22.25 36 53 37.25 16 24 3
NS-25 23 48 22.25 36 53 37.25 16 24 3
F-35 30 64 27.5 48 58 53 16 36 4
NS-35 30 64 27.5 48 58 53 16 36 4

Crosby Clamp-Co Beam Clamps
Crosby Clamp-Co Beam Clamps

Model No. Base Dimensions (in.)
C L M N P S T
F-5 13.5 n/a n/a n/a n/a 3 n/a
F-15 17 n/a n/a n/a n/a 4 n/a
NS-15 17 0.5 6.5 4.5 0.75 4 2.5
F-25 22.25 n/a n/a n/a n/a 5.5 n/a
NS-25 22.25 0.75 7.75 6.5 0.75 5.5 4
F-35 27.5 n/a n/a n/a n/a 6 n/a
NS-35 27.5 0.75 9 8.5 0.75 6 4.5

The Most Trusted and Respected Company in Rigging and Overhead Lifting.

Connect with us