Slingmax® Sparkeater® Slings

Sparkeater Sling

US Patent #4,850,629 CN Patent #1,280,458

SE When you have a hot environment up to 300°F (200°C), use a Sparkeater® to lift the load without marring the surface of the lifted piece. Also, when doing stage rigging, order this product with a black cover for the protection it gives from exposure to fire, heat, sparks and pyrotechnics. These slings are made from aramid high performance core yarns and an aramid cover. The Offshore Certification Bureau identified these slings as being as good as wire rope or chain for use in offshore applications in the oil industry. As with all Twin-Path® slings, an inner red cover provides an early warning safety alert.

Mfg. #	CSI Ref. #	Rated Capacities (lbs.)					Approx. Weight (lbs. per ft.) (Bearing-Bearing)	Nominal Body Width (in.)
		Vertical	Choker	Vertical Basket	Basket Hitches
				90°	60°	45°
TPSE 1000	CS-04-2342	10,000	8,000	20,000	17,320	14,140	0.4	1.5 – 3
TPSE 1500	CS-04-2343	15,000	12,000	30,000	25,980	21,210	0.45	1.5 – 3
TPSE 2000	CS-04-2344	20,000	16,000	40,000	34,640	28,280	0.51	1.5 – 3
TPSE 2500	CS-04-2345	25,000	20,000	50,000	43,300	35,350	0.57	1.5 – 3
TPSE 3000	CS-04-2346	30,000	24,000	60,000	51,960	42,420	0.71	2.0 – 4
TPSE 4000	CS-04-2347	40,000	32,000	80,000	69,280	56,560	0.83	2.0 – 4
TPSE 5000	CS-04-2348	50,000	40,000	100,000	86,600	70,700	1.14	2.5 – 5
TPSE 6000	CS-04-2349	60,000	48,000	120,000	103,920	84,840	1.27	2.5 – 5
TPSE 7000	CS-04-2350	70,000	56,000	140,000	121,240	98,980	1.39	2.5 – 5
TPSE 8500	CS-04-2351	85,000	68,000	170,000	147,220	120,190	1.65	3.0 – 6
TPSE 10000	CS-04-2352	100,000	80,000	200,000	173,200	141,400	1.84	3.0 – 6

METRIC CAPACITIES AVAILABLE

DO NOT EXCEED RATED CAPACITY

Please note: capacities shown include both paths and are for one complete sling. Smaller and larger capacities available upon request.

Sling can fail if damaged, misused or overloaded. Inspect before use. Damaged sling shall not be used. Use only if trained. Do not exceed rated capacity. Protect sling from being cut by load edges, corners, protrusions and abrasive surfaces. Avoid exposure to acid, alkali and temperatures over 300°F. DEATH or INJURY can occur from improper use or maintenance.