Slingmax® CornerMax® Sleeves

Engineered Cut Protection

CornerMax Sleeves The CornerMax® sleeve is the latest in rigging protection from Slingmax® Rigging Solutions. The CornerMax® sleeve is the ideal solution to protect synthetic slings from cutting when it is not practical to use a CornerMax® pad, whether due to curvature of the load edge or repetitive uses such as unloading steel coils. Independent field and laboratory testing has shown the CornerMax® sleeve to be extremely cut resistant. The CornerMax® sleeve is made with high tech fiber and is proven tough. In some applications the CornerMax® sleeve may be attached to the sling to prevent slippage. The true benefits of this revolutionary material far outweigh the costs and now provide for the use of synthetic slings in applications previously dominated by heavy chain, mesh and wire rope slings.

Mfg. #	CSI Ref. #	External Sleeve Width (in.)	Fastened over both legs of Twin-Path® Sling
CRNMXS04	CS-04-2322	6	Up to TPXC 7,000
CRNMXS10	CS-04-2323	10	Up to TPXC 25,000

NOTE: Wider sleeves are available.

Twin-Path® Coil Sling

10 times lighter than conventional steel coil gripper slings.
The Twin-Path® Coil Sling is so light that it is easy to grab and pull the sling.
Will not damage the load.
Repairable as manufacturer can remove a damaged CornerMax® sleeve and sew a new one to the sling.

Warning: Damaged or misused protection can result in damage or sling failure. Inspect before each use. Inspect for cuts, tears or damage that may prevent protection of the sling. Ensure protection is the correct size and type to protect the sling. Prevent sleeve and sling from slipping or sliding across load edge. DEATH or INJURY can occur from improper use, maintenance and/or inspection. MAXIMUM LOADING: Do NOT exceed 25,000 lbs. per inch of sling width.