Monday, May 21, 2012
Login
Rigging, Overhead Lifting, Load Securement & Contractor Supplies
 
Crosby® Vertical Clamps Print Email

Universal - For Lifting In Any DirectionThe Crosby Group

  • Available in capacities of .5 thru 30 metric tons (Higher Working Load Limits are available upon request).
  • Wide variety of jaw openings available: 0” to 6.13”.
  • Welded alloy steel body for strength and smaller size. Forged alloy components, where required.
  • Individually Proof Tested to 2 times the Working Load Limit with certification.
  • Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body.
  • Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty log book.
  • Available in a variety of styles:
    • IPU10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB).
    • IPU10J - Larger jaw opening.
    • IPU10S - For use with Stainless Steel material.
    • IPU10H - For use with materials with a surface hardness to 47Rc (450 HB).
  • Full 180° turning range for material transfer, turning or moving.
  • Lock open, lock closed ability with latch for pretension on material and then release of material.
  • This Crosby product is RFID equipped.Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook.
  • Minimum WLL of 10% of Maximum WLL.
  • Maintenance replacement kits are available.
  • Manufactured by an ISO 9001 facility.
  • All sizes are RFID equipped.

Model

Mfg. #

CSI Ref. #

Weight
Each (lbs.)

Working
Load Limit (t)*

IPU10

2701675

CS-08-1830

4.2

0.5

IPU10

2701663

CS-08-1831

5.29

1

IPU10

2701677

CS-08-1832

18.7

2

IPU10

2701665

CS-08-1833

32.6

3

IPU10

2701667

CS-08-1834

35.3

4.5

IPU10

2701669

CS-08-1835

52.9

6

IPU10/J

2702469

CS-08-1836

68

6

IPU10

2701671

CS-08-1837

65

9

IPU10/J

2701673

CS-08-1838

67.2

9

IPU10

2701679

CS-08-1839

125

12

IPU10/J

2701681

CS-08-1840

130

12

IPU10

2701683

CS-08-1841

174

16

IPU10/J

2701685

CS-08-1842

203

16

IPU10

2701687

CS-08-1843

281

22.5

IPU10/J

2701689

CS-08-1844

288

22.5

IPU10

2701691

CS-08-1845

337

30

IPU10/J

2701693

CS-08-1846

364

30

For stainless steel· with universal hoisting eye

IPU10/S

2702275

CS-08-1847

4.2

0.5

IPU10/S

2702263

CS-08-1848

4.6

1

IPU10/S

2702277

CS-08-1849

16.8

2

IPU10/S

2702265

CS-08-1850

32.6

3

IPU10/S

2702267

CS-08-1851

35.3

4.5

IPU10/S

2702269

CS-08-1852

52.9

6

IPU10/S

2702271

CS-08-1853

65

9

IPU10/S

2702279

CS-08-1854

130

12

For very hard materials - with universal hoisting eye

IPU10/H

2702175

CS-08-1855

4.2

0.5

IPU10/H

2702177

CS-08-1856

16.8

1

IPU10/H

2702165

CS-08-1857

32.6

2

IPU10/H

2702167

CS-08-1858

35.3

3

IPU10/H

2702169

CS-08-1859

53

4.5

IPU10/H

2702171

CS-08-1860

65

6

* Ultimate load is 5 times the Working Load Limit.

Crosby Vertical Clamp IPU10IPU10

The IPU10 vertical lifting clamp is used for the lifting, turning, moving or vertical transfer of sheet, plates, or fabrications from horizontal to vertical and down to horizontal (180°) as needed. The hinged hoisting eye allows for the clamp to place and lift the load from any direction, or with a multiple leg sling without side-loading the clamp.

 

Crosby Vertical Clamp IPU10S/IPU10HIPU10S

For use on Stainless Steel material.

IPU10H

For use on materials with a surface hardness to 47Rc (450 HB).

Crosby Vertical Clamps

Dimensions

Model

Dimensions (in.)

Jaw A

B

C

D

E

F

G

H

J

K

IPU10

0 – 0.63

1.73

5.05

8.97

1.19

4.53

1.61

1.11

n/a

0.39

IPU10

0 – 0.75

1.75

5.47

8.75

1.19

4.47

1.63

1.5

n/a

0.39

IPU10

0 – 1.38

3.08

7.91

14.64

2.75

7.47

2.41

2.17

n/a

0.63

IPU10

0 – 1.56

3.94

9.95

17.52

2.95

8.86

3.08

2.36

n/a

0.78

IPU10

0 – 1.56

3.94

9.95

17.52

2.95

8.86

3.23

2.56

n/a

0.78

IPU10

0 – 2

4.95

11.89

20.67

3.16

11.5

3.31

3.73

1.73

0.78

IPU10/J

2 – 3.88

4.96

11.89

20.67

3.15

13.46

3.31

3.73

1.73

0.78

IPU10

0 – 2

4.95

12.8

21.92

3.17

12.2

3.13

4.14

1.73

0.78

IPU10/J

2 – 3.88

4.95

12.8

22.13

3.16

14.17

3.13

4.14

1.73

0.78

IPU10

0 – 2.13

6.3

15.39

24.53

3.16

13.03

4.61

5.39

1.61

1

IPU10/J

2.13 – 4.25

7.02

17.28

26.5

3.16

16.34

4.61

5.39

1.61

1

IPU10

0.25 – 2.5

7.02

18.31

28.89

3.47

15.63

4.69

6.03

1.77

1

IPU10/J

2.5 – 5

8.19

20.52

31.11

3.47

18.58

4.99

6.34

1.77

1

IPU10

0.25 – 3.13

8.73

21.81

33.66

4.33

18.5

5.36

7.33

1.92

1

IPU10/J

3.13 – 6.13

9.95

24.72

36.61

4.33

22.64

5.36

7.72

1.92

1

IPU10

0.25 – 3.13

8.72

21.45

33.86

4.33

18.5

5.98

7.22

2.13

1.19

IPU10/J

3.13 – 6.13

9.84

24.41

36.81

4.33

22.25

5.98

7.72

2.13

1.19

For stainless steel - with universal hoisting eye

IPU10/S

0 – 0.63

1.73

5.05

8.97

1.19

4.53

1.61

1.11

n/a

0.39

IPU10/S

0 – 0.75

1.75

5.47

8.75

1.19

4.47

1.63

1.5

n/a

0.39

IPU10/S

0 – 1.38

3.08

7.91

14.64

2.75

7.47

2.41

2.17

n/a

0.63

IPU10/S

0 – 1.56

3.94

9.95

17.52

2.95

8.86

3.08

2.36

n/a

0.78

IPU10/S

0 – 1.56

3.94

9.95

17.52

2.95

8.86

3.23

2.56

n/a

0.78

IPU10/S

0 – 2

4.95

11.89

20.67

3.16

11.5

3.31

3.73

1.73

0.78

IPU10/S

0 – 2

4.95

12.8

21.92

3.17

12.2

3.13

4.14

1.73

0.78

IPU10/S

2.13 – 4.25

7.02

17.28

26.5

3.16

16.34

4.61

5.39

1.61

1

For very hard materials - with universal hoisting eye

IPU10/H

0 – 0.63

1.73

5.05

8.97

1.19

4.53

1.61

1.11

n/a

0.39

IPU10/H

0 – 1.38

3.08

7.91

14.64

2.75

7.47

2.41

2.17

n/a

0.63

IPU10/H

0 – 1.56

3.94

9.95

17.52

2.95

8.86

3.08

2.36

n/a

0.78

IPU10/H

0 – 1.56

3.94

9.95

17.52

2.95

8.86

3.23

2.56

n/a

0.78

IPU10/H

0 – 2

4.95

11.89

20.67

3.16

11.5

3.31

3.73

1.73

0.78

IPU10/H

0 – 2

4.95

12.8

21.92

3.17

12.2

3.13

4.14

1.73

0.78

Request for Quote