Three-Strand Specifications
|
|
Cut lengths and full
reels are available.
- Manila
- Polypropylene
- Nylon
- Dacron
|
 |
 |
|
Size (in.)
|
Manila
|
Polypropylene
|
|
Dia.
|
Cir.
|
Tensile Strength
|
lbs. per 100 ft.
|
CSI Ref. #
|
Tensile Strength
|
lbs. per 100 ft.
|
CSI Ref. #
|
|
3/16
|
5/8
|
405
|
1.5
|
CS-06-0713
|
720
|
0.7
|
CS-06-0733
|
|
1/4
|
3/4
|
540
|
2
|
CS-06-0714
|
1,130
|
1.2
|
CS-06-0734
|
|
5/16
|
1
|
900
|
2.9
|
CS-06-0715
|
1,710
|
1.8
|
CS-06-0735
|
|
3/8
|
1-1/8
|
1,215
|
4.1
|
CS-06-0716
|
2,430
|
2.8
|
CS-06-0736
|
|
1/2
|
1-1/2
|
2,385
|
7.5
|
CS-06-0717
|
3,780
|
4.7
|
CS-06-0737
|
|
5/8
|
2
|
3,960
|
13.3
|
CS-06-0718
|
5,580
|
7.5
|
CS-06-0738
|
|
3/4
|
2-1/4
|
4,860
|
16.7
|
CS-06-0719
|
7,650
|
10.7
|
CS-06-0739
|
|
7/8
|
2-3/4
|
6,930
|
22.5
|
CS-06-0720
|
10,400
|
15
|
CS-06-0740
|
|
1
|
3
|
8,100
|
27
|
CS-06-0721
|
12,600
|
18
|
CS-06-0741
|
|
1-1/8
|
3-1/2
|
10,800
|
36
|
CS-06-0722
|
16,500
|
23.7
|
CS-06-0742
|
|
1-1/4
|
3-3/4
|
12,150
|
41.8
|
CS-06-0723
|
18,900
|
27
|
CS-06-0743
|
|
1-1/2
|
4-1/2
|
16,650
|
60
|
CS-06-0724
|
26,700
|
38.5
|
CS-06-0744
|
|
1-5/8
|
5
|
20,250
|
74.4
|
CS-06-0725
|
32,400
|
47.5
|
CS-06-0745
|
|
1-3/4
|
5-1/2
|
23,850
|
89.5
|
CS-06-0726
|
38,700
|
57
|
CS-06-0746
|
|
2
|
6
|
27,900
|
108
|
CS-06-0727
|
46,800
|
69
|
CS-06-0747
|
|
2-1/4
|
7
|
36,900
|
146
|
CS-06-0728
|
62,100
|
92
|
CS-06-0748
|
|
2-1/2
|
7-1/2
|
41,850
|
167
|
CS-06-0729
|
72,000
|
107
|
CS-06-0749
|
|
3
|
9
|
57,600
|
242
|
CS-06-0730
|
103,000
|
153
|
CS-06-0750
|
|
3-1/2
|
11
|
81,900
|
367
|
CS-06-0731
|
146,000
|
232
|
CS-06-0751
|
|
4
|
12
|
94,500
|
436
|
CS-06-0732
|
171,000
|
275
|
CS-06-0752
|
|
Recommended Work Loads
|
20% of Breaking Test
|
17% of Breaking Test
|
Meets design requirements according to Federal Specification T-R-605B, Grade 11.
Three-Strand Specifications
|
Size (in.)
|
Nylon
|
Dacron (Polyester)
|
|
Dia.
|
Cir.
|
Tensile Strength
|
lbs. per 100 ft.
|
CSI Ref. #
|
Tensile Strength
|
lbs. per 100 ft.
|
CSI Ref. #
|
|
3/16
|
5/8
|
1,000
|
1
|
CS-06-0753
|
1,000
|
1.2
|
CS-06-0773
|
|
1/4
|
3/4
|
1,650
|
1.5
|
CS-06-0754
|
1,650
|
2
|
CS-06-0774
|
|
5/16
|
1
|
2,550
|
2.5
|
CS-06-0755
|
2,550
|
3.1
|
CS-06-0775
|
|
3/8
|
1-1/8
|
3,700
|
3.5
|
CS-06-0756
|
3,700
|
4.5
|
CS-06-0776
|
|
1/2
|
1-1/2
|
6,400
|
6.5
|
CS-06-0757
|
6,400
|
8
|
CS-06-0777
|
|
5/8
|
2
|
10,400
|
10.5
|
CS-06-0758
|
10,000
|
13
|
CS-06-0778
|
|
3/4
|
2-1/4
|
14,200
|
14.5
|
CS-06-0759
|
12,500
|
17.5
|
CS-06-0779
|
|
7/8
|
2-3/4
|
20,000
|
20
|
CS-06-0760
|
18,000
|
25
|
CS-06-0780
|
|
1
|
3
|
25,000
|
26
|
CS-06-0761
|
22,000
|
30.5
|
CS-06-0781
|
|
1-1/8
|
3-1/2
|
33,000
|
34
|
CS-06-0762
|
29,500
|
40
|
CS-06-0782
|
|
1-1/4
|
3-3/4
|
37,500
|
40
|
CS-06-0763
|
33,200
|
46.3
|
CS-06-0783
|
|
1-1/2
|
4-1/2
|
53,000
|
55
|
CS-06-0764
|
46,800
|
66.8
|
CS-06-0784
|
|
1-5/8
|
5
|
65,000
|
68
|
CS-06-0765
|
57,000
|
82
|
CS-06-0785
|
|
1-3/4
|
5-1/2
|
78,000
|
83
|
CS-06-0766
|
67,800
|
98
|
CS-06-0786
|
|
2
|
6
|
92,000
|
95
|
CS-06-0767
|
80,000
|
118
|
CS-06-0787
|
|
2-1/4
|
7
|
125,000
|
129
|
CS-06-0768
|
107,000
|
157
|
CS-06-0788
|
|
2-1/2
|
7-1/2
|
140,000
|
149
|
CS-06-0769
|
122,000
|
181
|
CS-06-0789
|
|
3
|
9
|
200,000
|
210
|
CS-06-0770
|
174,000
|
258
|
CS-06-0790
|
|
3-1/2
|
11
|
300,000
|
316
|
CS-06-0771
|
254,000
|
384
|
CS-06-0791
|
|
4
|
12
|
360,000
|
379
|
CS-06-0772
|
300,000
|
460
|
CS-06-0792
|
|
Recommended Work Loads
|
11% of Breaking Test
|
11% of Breaking Test
|
Meets design requirements according to Federal Specification T-R-605B, Grade 11
- Never exceed the working load limit of rope.
- Attachments must have at least same working load limit as the rope used.
- Keep out from under a raised load.
- Destroy, rather than discard, rope to be retired.
- Inspect rope frequently; store properly.
- Avoid overheating, shock loads, chemicals, rust and abrasion.
Do Not Exceed Work Load Limit or 20% of the Product’s Break Strength.
 Read the Important Warnings & Information Section before use.
|
